Oregon PS56E 16″ PowerSharp Chain and Stone

Oregon PS56E 16″ PowerSharp Chain and Stone

Oregon PS56E 16″ PowerSharp Chain and Stone


£23.33 excl. VAT

£28.00 incl. VAT


PowerSharp® is a unique, proprietary saw chain and sharpening tool that gives the user the power to sharpen their PowerSharp® chain, on the saw, on the job, in seconds. The PowerSharp® system comprises four components that work together to provide a fast, simple and portable method of sharpening PowerSharp® saw chain. The Oregon PowerSharp system is available for most chainsaws that run on a 3/8″ Picco (Low Profile 1.3mm / 0.050″) chain. *Please note, chain and stone are sold separately and are required for the initial set up* Model PS56E is 16″ – please email us and we will advise which model will fit your chain saw. Visit www.powersharp.co.uk for further information and demonstration videos

Full Details

The four components of the PowerSharp® system are sold in two packs:

PACK 1 – One contains the specific PowerSharp® guide bar and sharpening unit (Available separately – see related products)

PACK 2 – The other contains the specific PowerSharp® chain and sharpening stone. (Current item listing)

To get started with PowerSharp® you will need both packs. The chain can be sharpened between 5 and 15 times, depending on the conditions. It must always be replaced at the same time as the sharpening stone. Replacement chains are sold with a replacement sharpening stone.

Pack 1 – A041 16″

Sold separately –

Pack 2 – PS56E 16″

PowerSharp® chain

  • PowerSharp® Chain has unique, top-sharpening cutters and is low kickback per ANSI B125.1 and CSA Z62.3.
  • Chisel-style cutters, ramped depth gauges and ramped guidance drive links provide a smooth and efficient cutting action and good chip flow.                 
  • The diamond-coated dresser link resurfaces the sharpening stone, ensuring flat cutter to stone contact                 
  • Look for the PowerSharp® diamond stamped on each cutter link. Only genuine PowerSharp® saw chains can be used with the PowerSharp® system.                 

Sharpening Stone

  • The sharpening stone fits inside the bar-mounted sharpener. Matching the saw chain life, the stone should be replaced at the same time as the PowerSharp® chain.