Full Details

STIHL 2-MIX-Engine
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Tool free filler caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Combi lever
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Carburettor heating (V)
By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
Ematic chain lubrication system
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL Oilomatic saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

Technical data Value
Displacement cm³ 50.2
Power output kW/bhp 2.6/3.5
Weight kg 1) 5.6
Power-to-weight ratio kg/kW 2.2
Bar length cm 35-45
Bar length ” 14-18
CO2 g/kWh 826
Sound pressure level dB(A) 2) 103
Sound power level dB(A) 2) 115
Vibration values left/right m/s² 3) 4.5/4.5
STIHL Oilomatic saw chain pitch/type .325 ”
Tank volume l 0.50
Speed at maximum power rpm 9.500
Bumper spike Steel claw
Sprocket – number of teeth 7 Z
Cylinder Chrome
Filter material ,Tool-free filler cap
Oil pump Not adjustable
Filter Long-term filter system (pre-separation) / cartridge filter hd2
Sprocket Profile sprocket
Chain tensioning Lateral chain tension
Anti vibration system Steel spring
Handle type Standard grip
Exhaust Standardschalldämpfer
Filler cap Tool-free filler cap
Chain pitch .325″
Carburettor Vergaservorwärmung / Kompensator / Limiter Caps / Standardvergaser
EPA Certified fuel consumption glh 0.375
EPA Certified fuel consumption l/h 1.418
Oil tank volume cm3 240
1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

Please click the link below to read about chain saw safety

Chain Saw Safety Manual

Please click the link below to see the relevant Stihl videos for information on correct assembly and use of your chainsaw

https://www.youtube.com/channel/UC83FJR5XXAjl6MIwV1z06tA/featured